Data Projects

Finding CO2 for capture and storage in Europe

Carbon dioxide emissions are, unfortunately, present virtually everywhere in the world. Finding sources of CO2 emissions large enough to be captured and stored is however a more challenging task.

Carbon dioxide emissions are virtually everywhere in Europe, but which of these can be captured and stored?

Large power plants, industrial sites and waste incineration plants are typically good candidates for CO2 capture and storage, since they emit large quantities of CO2 at fixed locations. In 2017 there were ca. 2000 of these plants in Europe, each emitting more than 100 000 tonnes CO2 per year.

Endrava mapped each of the plants in our data-analysis tool, captureMap. The Norwegian oil and gas association supported the initial development of the tool.

CaptureMap shows that large sites emitted 1 644 million tonnes CO2 in 2017, which is 38% of the European GHG emissions. Of these, our estimations show that 1 337 million tonnes CO2 could be captured, from ca. 1 800 large emission sites in Europe. This represent about one third of all the greenhouse gas emissions in Europe in 2017.

1800 sites in Europe could implement carbon capture, which could make it possible to store 1 337 million tonnes CO2 per year, ca. 30% of the European GHG emissions

Our tool allows finding candidates for piloting and scaling-up carbon capture in Europe, and is already successfully used by the Northern Lights project for this purpose. It includes metadata about each emission site, distances to sea and to potential storage hubs, potentially important clusters of emissions, as well as an overview of coastal and innland ports in Europe.

Illustration of the CO2 database

They work on this project:

Valentin Vandenbussche
Sigrid Møyner Hohle
Eric Rambech